Side Window template for Dolphin 19
-
Calum
- Posts: 11
- Joined: Thu Feb 14, 2013 2:12 pm
Side Window template for Dolphin 19
Can anyone help me out with a template or dimensions of the side window for a Dolphin 19? Shetland themselves were no help. Thanks.
-
tatsuko
- Posts: 59
- Joined: Fri Feb 07, 2014 2:45 pm
- Location: Port Ness, Isle of Lewis
Re: Side Window template for Dolphin 19
Are you sure it is a Shetland Dolphin as that is an open dinghy style boat 14' long. The Shetland boats that are 19' are the Black Hawk and the Kestrel as far as I know.
Regards Steve
Regards Steve
-
Calum
- Posts: 11
- Joined: Thu Feb 14, 2013 2:12 pm
-
Calum
- Posts: 11
- Joined: Thu Feb 14, 2013 2:12 pm
Re: Side Window template for Dolphin 19
Anyone able to ID her?
-
tatsuko
- Posts: 59
- Joined: Fri Feb 07, 2014 2:45 pm
- Location: Port Ness, Isle of Lewis
Re: Side Window template for Dolphin 19
Hi there
Looks like a Black Hawk to me but the side windows look like they have been replaced with non standard windows. Actually on second thoughts more likely to be a Kestrel as on the Black Hawk the anchor locker hatch opened the other way round, they used the same hull but a different interior and also different fittings on the exterior. I have posted pics of my Black Hawk in the gallery section, shows the interior as well. Have a close look at some of the pics of the Kestrel
Looks like a Black Hawk to me but the side windows look like they have been replaced with non standard windows. Actually on second thoughts more likely to be a Kestrel as on the Black Hawk the anchor locker hatch opened the other way round, they used the same hull but a different interior and also different fittings on the exterior. I have posted pics of my Black Hawk in the gallery section, shows the interior as well. Have a close look at some of the pics of the Kestrel
-
tatsuko
- Posts: 59
- Joined: Fri Feb 07, 2014 2:45 pm
- Location: Port Ness, Isle of Lewis
Re: Side Window template for Dolphin 19
Its a Kestrel, did a search on google for images
-
Calum
- Posts: 11
- Joined: Thu Feb 14, 2013 2:12 pm
Re: Side Window template for Dolphin 19
Thanks very much, any one any idea of window dimensions for a Kestrel? Sorry I am not near to boat just now (3 hours away)
-
tatsuko
- Posts: 59
- Joined: Fri Feb 07, 2014 2:45 pm
- Location: Port Ness, Isle of Lewis
Re: Side Window template for Dolphin 19
Well seeing how you have the original windows in her, you can make your own templates or of course you can buy new ones here:
http://www.shetlandboats.co.uk/product.php/1114
at a price of course!
When I renewed my windows took the old ones out, frames and all, and just lay the old perspex on the new perspex, drew the lines and proceeded to cut very slowly and carefully. Leave the protective covering on the perspex till you actually fit them. Perspex from Trent Plastics on E-bay. 5mm thick available in clear and coloured. Needed 3 sheets for the front and side windows, cost £102 + delivery which was about £45 to the Western Isles, would imagine delivery would be cheaper to mainland UK. Use a good quality sealant, don't skimp on that, masking tape to get a good clean line, remove masking tape as soon as you have applied the sealant, before it has a chance to dry at all.
My window frames were held in place with sealant and rivets. Had to drill out the rivets and when inserted new rivets used plenty of sealant on the rivet holes, and the internal and external frames. Not sure if its the same system on your boat.
http://www.shetlandboats.co.uk/product.php/1114
at a price of course!
When I renewed my windows took the old ones out, frames and all, and just lay the old perspex on the new perspex, drew the lines and proceeded to cut very slowly and carefully. Leave the protective covering on the perspex till you actually fit them. Perspex from Trent Plastics on E-bay. 5mm thick available in clear and coloured. Needed 3 sheets for the front and side windows, cost £102 + delivery which was about £45 to the Western Isles, would imagine delivery would be cheaper to mainland UK. Use a good quality sealant, don't skimp on that, masking tape to get a good clean line, remove masking tape as soon as you have applied the sealant, before it has a chance to dry at all.
My window frames were held in place with sealant and rivets. Had to drill out the rivets and when inserted new rivets used plenty of sealant on the rivet holes, and the internal and external frames. Not sure if its the same system on your boat.
