Having searched the internet for a suitable link piece to join my main outboard and aux outboard together so that the aux turns with the main as i use the aux for trolling at slow speed (it saves lots of fuel) i couldnt find anything suitable or err cheap. So i built this one. Cost me about £20 to make and is fully adjustable (toe in, toe out to get both engines perfectly lined up.). If anybody is interested i can do a wee right up on what to buy and how to make it.
Yes I'm interested in doing anything to get around the problem of sitting in the stern of the boat with little or not view of what's ahead.
How do you get around the problem of tilt ?
Hi John, If you want to tilt one or both of the engines you have to disconnect it. If you look on the left hand side joint i have made a quick release clevis pin out of stainless rod you just pull that off and it all lifts off the aux engine takes about 5 seconds to do.
what a brilliant idea, i was going around in circles the other week in shoreham harbour using my aux. i must have looked like an absolute loon, or someone trying to nick a boat. this would have been a god send. nice one.
Unfortunately my engines are arranged so that it makes it difficult to link them ( see under 'Cruising Notes and Ideas John Halls West Bay' - third picture )