Hi
has anyone resealed the hudini hatch on a shetland 570 and if son what did you use please
Dave
sealing hudini hatch on shetland 570
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
sealing hudini hatch on shetland 570
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
https://www.facebook.com/ashtonmarineservices
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: sealing hudini hatch on shetland 570
Hi
We replaced our Houdini hatch completely on our 570. So I am presuming you are referring to the seal between the boat and hatch. We used Unibond Silicone Frame Sealant in Clear. Once set we let loose the power jet washer on it and it did not leak.
Sue AdmIn
We replaced our Houdini hatch completely on our 570. So I am presuming you are referring to the seal between the boat and hatch. We used Unibond Silicone Frame Sealant in Clear. Once set we let loose the power jet washer on it and it did not leak.
Sue AdmIn
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
daveinglasgow
- Posts: 680
- Joined: Tue Mar 15, 2011 9:04 am
- Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Re: sealing hudini hatch on shetland 570
Hi Sue
the rubber has gone where the window closes so water is getting in. the seal around the actual hatch seems fine and that hatch itself looks like it is in good condition so I just need to be able to close the hatch and stop water getting in!
Dave
the rubber has gone where the window closes so water is getting in. the seal around the actual hatch seems fine and that hatch itself looks like it is in good condition so I just need to be able to close the hatch and stop water getting in!
Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
https://www.facebook.com/ashtonmarineservices
-
daveflack
- Posts: 291
- Joined: Fri Nov 08, 2013 6:54 pm
- Location: Black Hawk "Atlast"Ullswater, now a 4+2
Re: sealing hudini hatch on shetland 570
Well hello all,Houdini hatch?A follow on to this & another post by a fellow Member,mine is leaking a tiny bit around the glass in one corner,having spoken to houdini they say the glass is bedded on a form of mastic,as opposed to silicone,which will deteriorate with time.I've just gently scraped this partially out on both sides & refilled with black silicone.For the frame to hull seal,it's advised to use a "none setting" sealant,not necessarily a branded name like sikaflex.Also,from various web sites,there are 2 types of "sponge seal" which seal between the mounting hull frame &the "lid",one is self-adhesive & the other fits into a slot in the frames moulding.These are available thro'Sealsdirect & a couple of suppliers on E-bay.
Pending on age,Houdini advise NOT to try &split the frame around the glass as it will stretch&distort the old aluminium BE WARNED 