CHEAP EASY DIY HOUDINI HATCH COVER

Thoughts, Ideas and General Questions
aggalletley
Posts: 63
Joined: Fri Feb 24, 2012 4:44 pm

CHEAP EASY DIY HOUDINI HATCH COVER

Post by aggalletley »

Fed up with drips from a leaking Houdini hatch on my Shetland 4 + 2 I came up with the following solution. Take the top off a wheelie bin !!! ( If you tell the council it has gone missing they will send you a new one ) Check it is the correct size...mine overlaps the cover all round and fits quite snugly. I then cut off most of the hinge area using a soldering iron to cut through the plastic and finish off trimming to a smooth aesthetic curve with a sharp knife. Drill 4 holes one in the remains of each hinge and two at the front corners of the front flap (If no flap am sure there are two other spots you can choose. Give a coat of "white plastic primer" the type used on car bumpers about £7.00 a can. Then one coat of domestic white undercoat followed by one domestic white topcoat. Apply a bungee cord of suitable length to each hole and hook other ends on to each of the air intakes on the roof and each of the loops on the stainless steel front rail and that's it. IF you have a better fixing idea let me know.
Looks good as though it was made for the job. Heavy rainfall following its fitting proved its worth
Andrew