Black hawk

Thoughts, Ideas and General Questions
avril19
Posts: 3
Joined: Mon Aug 31, 2015 12:26 pm

Black hawk

Post by avril19 »

Hello, I have just purchased a Black hawk and about to start a re-furb. Has anyone found the beige pigment for the gel coat?
daveflack
Posts: 291
Joined: Fri Nov 08, 2013 6:54 pm
Location: Black Hawk "Atlast"Ullswater, now a 4+2

Re: Black hawk

Post by daveflack »

Well hello avril19,Dave Flack here sounds like the same pigment as my boat,got mine thro' a friend who has his own f/glass company.As many others have found the "makers men"will be of no help whatsoever :lol: If I can find the tin I'll post the code No to you cheers Magicflack.
daveflack
Posts: 291
Joined: Fri Nov 08, 2013 6:54 pm
Location: Black Hawk "Atlast"Ullswater, now a 4+2

Re: Black hawk

Post by daveflack »

Hi again Avril19,Re pigment for gelcoat I think it's referred to as a RAL No.If your boat is the same colour as mine it has the U.N.code No1866,not sure how much you require but I think the minimum is a 1Kg tin.As per filler mixing ratios of "a golf ball of filler to a pea of hardener"if you apply the same to gel coat all you will need is 1/2 a pea,note to little colour will give a sort of opaque look to the finished job,however to much and you will risk the gel NOT setting properly.The area must be squeaky clean and you could end up with a black line around the repair this is unavoidale.Hope this is of help yours Magicflack.
Docktor
Posts: 28
Joined: Sat Jul 14, 2012 10:39 pm

Re: Black hawk

Post by Docktor »

Thanks Dave - I was looking for this colour too.
Shetland 570 - Mark 2
Mariner 55EL
daveflack
Posts: 291
Joined: Fri Nov 08, 2013 6:54 pm
Location: Black Hawk "Atlast"Ullswater, now a 4+2

Re: Black hawk

Post by daveflack »

Hello Docktor,no problem after all we're here to help each other if and when we can :D .Let me know how you get on and if needbe pass on any info to avril19 cheers once again Magic.
tatsuko
Posts: 59
Joined: Fri Feb 07, 2014 2:45 pm
Location: Port Ness, Isle of Lewis

Re: Black hawk

Post by tatsuko »

Try this company, look down the left hand menu at pigments, a wide range here.

http://www.ecfibreglasssupplies.co.uk/default.aspx
avril19
Posts: 3
Joined: Mon Aug 31, 2015 12:26 pm

Re: Black hawk

Post by avril19 »

Hello everyone who posted a reply, many thanks for the advice. We have been able to avoid doing any gel coat work for moment.
Thanks again for your help.