Hi!
I have a Johnson 50 HP 1993 year short shaft outboard motor.
I am looking for long shaft converter, because with the Shetland suntrip it is necessary.
Sadly I can not find anywhere.
Someone could help me, where to buy?
Thanks!
long shaft converter
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: long shaft converter
Hi,
You may need to look for a 'spares or repair' long shaft, and fit your good powerhead and gearbox to the long shaft leg. Finding an extension block, water pickup pipe, exhaust, gear linkage and drive shaft to fit a 24 year old outboard will be awkward and expensive.
Hope this helps,
Chris
You may need to look for a 'spares or repair' long shaft, and fit your good powerhead and gearbox to the long shaft leg. Finding an extension block, water pickup pipe, exhaust, gear linkage and drive shaft to fit a 24 year old outboard will be awkward and expensive.
Hope this helps,
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
baal
- Posts: 23
- Joined: Tue Sep 12, 2017 3:49 pm
Re: long shaft converter
In Hungary, a 24-year-old engine it costs a lot.(the price is three months average wage, ca.2000 euro)
It's a very good engine and I saw you can get a converter, just do not know where.
It's a very good engine and I saw you can get a converter, just do not know where.
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: long shaft converter
Hi,
I appreciate that your engine has significant value in Hungary, but I still believe that your best and easiest option is to find a broken engine, and fit your motor unit and gearbox to the long shaft leg and transom frame.
Finding a suitable broken engine should be easier than finding the individual components. Is your engine a 2 stroke 2 cylinder model, maybe with oil automixing (VRO)? If so, it is a common design used by Johnson and Evinrude for their 40hp and 50hp engines between the 1980s and 2004, and all major components are identical and interchangeable.
Spare parts are increasingly scarce. Both companies were part of the Outboard Marine Corporation (OMC) which folded around 2001 and bought by Bombardier (BRP). Many parts for engines are made by Original Equipment Manufacturers OEMs and used by the outboard makers such as starter motors, power trim pumps and impellors. Other parts such as the outboard leg are made by the outboard company themselves.
Bombardier are no longer supplying their specific parts for OMC era motors, only parts they can still buy from other suppliers, such as impellors and gaskets. New leg extension parts will not be available from Bombardier.
I replaced a 1989 Evinrude 40hp VRO in 2004 with a new Johnson 50hp VRO and they were identical apart from the carburettor jets and some components which were latterly made of plastic, such as throttle linkages. I sold the Johnson in 2014 when I could no longer easily get spare parts from BRP for the OMC era design Johnson (but built by BRP...)
That is why I think you would better to find a broken longshaft engine to scavenge the parts.
Chris
I appreciate that your engine has significant value in Hungary, but I still believe that your best and easiest option is to find a broken engine, and fit your motor unit and gearbox to the long shaft leg and transom frame.
Finding a suitable broken engine should be easier than finding the individual components. Is your engine a 2 stroke 2 cylinder model, maybe with oil automixing (VRO)? If so, it is a common design used by Johnson and Evinrude for their 40hp and 50hp engines between the 1980s and 2004, and all major components are identical and interchangeable.
Spare parts are increasingly scarce. Both companies were part of the Outboard Marine Corporation (OMC) which folded around 2001 and bought by Bombardier (BRP). Many parts for engines are made by Original Equipment Manufacturers OEMs and used by the outboard makers such as starter motors, power trim pumps and impellors. Other parts such as the outboard leg are made by the outboard company themselves.
Bombardier are no longer supplying their specific parts for OMC era motors, only parts they can still buy from other suppliers, such as impellors and gaskets. New leg extension parts will not be available from Bombardier.
I replaced a 1989 Evinrude 40hp VRO in 2004 with a new Johnson 50hp VRO and they were identical apart from the carburettor jets and some components which were latterly made of plastic, such as throttle linkages. I sold the Johnson in 2014 when I could no longer easily get spare parts from BRP for the OMC era design Johnson (but built by BRP...)
That is why I think you would better to find a broken longshaft engine to scavenge the parts.
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: long shaft converter
Hi,
Checking on the current Bombardier online parts catalog for 1993 Johnson 50hp, there are no major components such as long shaft legs available. Several 50hp models I have checked have listed some components such as longshaft gear cases, driveshafts and shift rods, but this information is likely to be simply imported into the BRP database from the old OMC records, most of which parts are long discontinued.
I have checked the part numbers for the 1993 40hp and 50hp Johnson and Evinrude outboards and they all use the same gearcase and cylinder heads, so it appears I was right in assuming that you can use spares for any of these on your outboard.
Go to epc.brp.com/index and search Johnson in the products drop down box, then select year, hp and finally your specific engine model code for a full list of parts that have been supplied historically, some of which may still be available.
Personally, I would look at selling on the shortshaft to buy a longshaft engine, although I appreciate that there is a very limited market for short shaft 50hp engines, mainly big inflatable boats or very old boats such early 535s or dorys.
Hope this helps,
Chris
Checking on the current Bombardier online parts catalog for 1993 Johnson 50hp, there are no major components such as long shaft legs available. Several 50hp models I have checked have listed some components such as longshaft gear cases, driveshafts and shift rods, but this information is likely to be simply imported into the BRP database from the old OMC records, most of which parts are long discontinued.
I have checked the part numbers for the 1993 40hp and 50hp Johnson and Evinrude outboards and they all use the same gearcase and cylinder heads, so it appears I was right in assuming that you can use spares for any of these on your outboard.
Go to epc.brp.com/index and search Johnson in the products drop down box, then select year, hp and finally your specific engine model code for a full list of parts that have been supplied historically, some of which may still be available.
Personally, I would look at selling on the shortshaft to buy a longshaft engine, although I appreciate that there is a very limited market for short shaft 50hp engines, mainly big inflatable boats or very old boats such early 535s or dorys.
Hope this helps,
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
-
baal
- Posts: 23
- Joined: Tue Sep 12, 2017 3:49 pm
Re: long shaft converter
thanks for the reply!
Unfortunately, the component is very expensive and I got the answer:
The kit you are looking for is 720.00 plus shipping
Thank You
Rudy Solares
www.marinepartsguys.com
1-866-791-4505
so much money in the world
Unfortunately, the component is very expensive and I got the answer:
The kit you are looking for is 720.00 plus shipping
Thank You
Rudy Solares
www.marinepartsguys.com
1-866-791-4505
so much money in the world