Hello Forum, some adive if anyone can help please?
Should the Hull Identification Number and the serial number on the Builders Plate be the same?
The reason for asking is, it struck me earlier this year I hadn't seen either the HIN or Builders Plate on our Shetland 27. Enquiries with Shetland Boats confirmed where both should be, but alas, I couldn't find either.
Shetland have just provided me with a Builders Plate to fix on the boat, but the serial number on the Builders Plate does not match the HIN on the original Declaration of Conformity Certificate issued for the boat.
I have tried ringing Shetland today but no reply.
I am happy our boat is legitamate and legal due to all the paperwork and paer trail provided when we bought it.
Any help would be appreciated.
Hull / serial numbers
-
admin
- Site Admin
- Posts: 862
- Joined: Sat Feb 19, 2011 3:00 pm
- Location: "Phonix" , Tuckton Basin, Christchurch
Re: Hull / serial numbers
Shetland HIN numbers are normally stamped into the gel coat in the transom or on the outside of the transom. You might find your outboard fittings cover it. The number is about 20 digits long
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
Kenneth Grahame
-
DACS
- Posts: 77
- Joined: Sat Jul 19, 2014 9:59 am
Re: Hull / serial numbers
We have a Shetland 27i. The hull number is on the outside of the transom on the starboard side just below the join to the superstructure. On our boat the number does not exactly match the ISO standard but is "GB JRMC032006".
The Builder's Plate is a metallic label attached to the side of the cockpit, near to the helm. There does not appear to be any requirement for the HIN to be shown on the Builder's Plate but ours does include a Serial Number which is 032 and corresponds to the number in the middle of the HIN. The boat was built in 2006 which corresponds to the the last two digits of the HIN.
The Builder's Plate is a metallic label attached to the side of the cockpit, near to the helm. There does not appear to be any requirement for the HIN to be shown on the Builder's Plate but ours does include a Serial Number which is 032 and corresponds to the number in the middle of the HIN. The boat was built in 2006 which corresponds to the the last two digits of the HIN.
-
oddbod
- Posts: 47
- Joined: Mon Oct 10, 2016 6:56 am
Re: Hull / serial numbers
Thank you both for your speedy replies and information, they are much appreciated.
As luck would have it, Shetland called me back some time after I had posted the thread!
James informed me the serial number on the Builders Plate is not the same as the HIN. The serial number for our boat is 202, but these numbers do not correspond with any of the HIN. The last two on the HIN are 09 which corresponds with its build date.
I have yet to find the HIN on the boat. As I have cut and polished every millimetre of the outside of the hull, I am confident the HIN is not marked on the boat, unless as Sue says, it is hidden somewhere near the outboard mounting point. Unless a previous owner had removed the Builders Plate, there wasn't one fitted originally.
I spoke to James at Shetland back in February and he recalls the boat when it was sold to its first owner and was able to give us details of the boat. He did not appear too suprised there wasn't a builders plate. In fairness to him, as I understand he has a mixed reputation, he eventually sent out a new Builders Plate as well as giving me some adive as I couldn't get the blown air heating to work. Following his advice, it is now working. All down to spiders nesting in the inlet and outlet ports!
Thanks one again for the informaton. Perhaps we will get a day or two this year when this weather allows us to use the boat!!
As luck would have it, Shetland called me back some time after I had posted the thread!
James informed me the serial number on the Builders Plate is not the same as the HIN. The serial number for our boat is 202, but these numbers do not correspond with any of the HIN. The last two on the HIN are 09 which corresponds with its build date.
I have yet to find the HIN on the boat. As I have cut and polished every millimetre of the outside of the hull, I am confident the HIN is not marked on the boat, unless as Sue says, it is hidden somewhere near the outboard mounting point. Unless a previous owner had removed the Builders Plate, there wasn't one fitted originally.
I spoke to James at Shetland back in February and he recalls the boat when it was sold to its first owner and was able to give us details of the boat. He did not appear too suprised there wasn't a builders plate. In fairness to him, as I understand he has a mixed reputation, he eventually sent out a new Builders Plate as well as giving me some adive as I couldn't get the blown air heating to work. Following his advice, it is now working. All down to spiders nesting in the inlet and outlet ports!
Thanks one again for the informaton. Perhaps we will get a day or two this year when this weather allows us to use the boat!!