Shetland Sheltie - I was looking for a project...I got one

Thoughts, Ideas and General Questions
fripforever
Posts: 1
Joined: Fri Aug 24, 2018 3:02 pm

Shetland Sheltie - I was looking for a project...I got one

Post by fripforever »

Hi all,

I'm a new member having just bought a Shetland Sheltie. The Shetland plate shows the number 3371, so I'm guessing its from the early '70s? I'd appreciate it if someone could confirm that. It doesn't have a motor yet, and I'm a little confused about the max rating for the Sheltie, is it 40hp or 65hp?

I was looking for a project boat and this fits the bill for sure. I've taken up the deck and will clearly need to take it all back to the hull and rebuild. Not a problem, although it looks like the old deck was designed such that it doesn't span the complete beam (see pics). My plan is to add new stringers/bulkheads to enable the deck to span the whole beam, which will require the cabin door to be re-modelled (was this the original design?). I'll set the height of all stringers/bulkheads to deck level (no gaps), coat in poly resin and glass, tabbing to the hull - then put down a new deck and glass that in too. Anyone see a problem with this approach? Or should I just rebuild the underfloor to match the old design?

Anyhow, here are some pics...
You do not have the required permissions to view the files attached to this post.
Trident
Posts: 1
Joined: Wed Oct 25, 2017 6:28 pm

Re: Shetland Sheltie - I was looking for a project...I got one

Post by Trident »

Hi
Wondering how the sheltie project is coming along, any more pics.
I also bought a sheltie project which looks in far worse condition than yours