Fixing a seat
-
Deldick
- Posts: 1
- Joined: Tue Aug 14, 2018 3:19 pm
Fixing a seat
I want to fix a pedestal seat to my Shetland hobbys is there a special place or can i fix it to the deck where i need it to be?
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: Fixing a seat
Hi,
There isn't a special place, but unless your cockpit sole has been replaced with much thicker plywood, you may not find much to fix into, the factory fitted is usually only about 12mm. Shetland fitted seats that were supported by hinges at the side into the topsides moulding and just resting on the floor.
Fitting a pedestal base onto the floor and using a long pedestal leg will create a long lever with a large weight on the end pulling back and forth and side to side on the floor fixings as the boat rocks. Just like a wrecking bar prising your floor up really.
Chris
There isn't a special place, but unless your cockpit sole has been replaced with much thicker plywood, you may not find much to fix into, the factory fitted is usually only about 12mm. Shetland fitted seats that were supported by hinges at the side into the topsides moulding and just resting on the floor.
Fitting a pedestal base onto the floor and using a long pedestal leg will create a long lever with a large weight on the end pulling back and forth and side to side on the floor fixings as the boat rocks. Just like a wrecking bar prising your floor up really.
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...