New Boater Advice

Thoughts, Ideas and General Questions
pacton01
Posts: 5
Joined: Thu Aug 22, 2019 11:15 am

New Boater Advice

Post by pacton01 »

Hi, I am new to boating and have just bought a 1986 Family 4 and would like some advice please. We will be using her on the River Waveney.

- I have bought her out of the water subject to a test, what should I look out for when she is in the water?
- It has a 9.9 Mariner outboard from 2005. It is fitted to a bathing frame bolted to the stern. I will check the tell tail but what else should I look for?
- the two fold away helmsman chairs are very high so when sitting, I can't see out with the canopy up without crouching down. A simple mod might be to lower the pivot bracket and cut the legs down a bit. Has anyone had the same problem?
- I assume there is a water tank on board that will be useful to fill for drinking / tea. I also assume it will need sterilising / flushing out but how do I do this?
- the windows have apparently been re-sealed and the hatch doesn't leak so hopefully water tight from rain.

Any other advice welcome.

Thanks

Phil
vreagh
Posts: 327
Joined: Sat Aug 02, 2014 5:46 pm
Location: Cornwall

Re: New Boater Advice

Post by vreagh »

Hi, and welcome to the world of boating. Camping and caravan stores sell sterilizing tablets that you simply drop in and flush. My first experience of boating was on the Waveney, hired a cruiser called Lucky Choice from a
Boatyard on Oulton Broad in 1959. £29 for the week !!
pacton01
Posts: 5
Joined: Thu Aug 22, 2019 11:15 am

Re: New Boater Advice

Post by pacton01 »

Thank you. Sorry for appearing dim, but how do I flush the tank? Is there another way rather than through the tap?
Also, any advice on who to insure with - 3rd party only.
Regards Phil
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: New Boater Advice

Post by dellquay13 »

Hi,

The water tank is simply a big rectangular bottle, either wash it or replace from a caravan shop.
Is the outboard 2 stroke or 4? Either way, check the oil in the gear box at the bottom of the leg isn't creamy by unscrewing the drain plug momentarily. If it is 4 stroke check the engine oil isn't creamy either. Check it will go smoothly in and out of F and R gears without chattering when the engine is running. Check the steering is smooth going full lock in either direction.
Check the windows don't leak with a hosepipe.
The helm seat isn't too high, it's a badly designed canopy, the seat is the right height with the canopy folded down. In bad weather I either steer with neck ache, my head out of the side of the canopy or in a raincoat with the canopy down.
As for insurance, unless you have a recent professional survey, at the age of your boat I suggest you use a broker to find a policy that doesn't insist on a survey as many underwriters require them for boats over 25-30 years old.
Chris
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
User avatar
Freebird19
Posts: 79
Joined: Tue Jan 12, 2016 5:57 pm
Location: Black Hawk "Freebird" Norfolk

Re: New Boater Advice

Post by Freebird19 »

When we bought our Black Hawk we took over the insurance from the previous owner with Navigators and General. They seem to be the insurance provider many brokers use but we deal directly with them. Seem to be reasonable policies.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: New Boater Advice

Post by dellquay13 »

My broker has previously found policies for me that haven't required marine surveys from Haven-Knox-Johnson and Aviva, but they may have been survey free because I have owned and insured the boat fully comp continuously since it was only 12 years old without incident or claim.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: New Boater Advice

Post by dellquay13 »

3rd party insurers for inland waterways may accept a current Boat Safety Certificate in lieu of a Marine Survey, they don't cover the same things but both show that a level of maintenance has been undertaken.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
pacton01
Posts: 5
Joined: Thu Aug 22, 2019 11:15 am

Re: New Boater Advice

Post by pacton01 »

Great advice thank you. I didn't realise the water tank was separate so will be easy. The OB is a 9.9 Mariner 4 stroke and the seller has said he will service it first via a local company that I know - bonus! I won't do anything with the seats until I try it as I did wonder if they would be right with canopy down. Looks like its neck ache then! I found third party insurance from Noble Marine - they treat a boat with a 9.9 OB as a tender so its only £33.60, cover 5 million. Should be picking up this weekend when I will check her on the water!
Adam
Posts: 86
Joined: Tue Oct 02, 2018 3:38 pm

Re: New Boater Advice

Post by Adam »

Hi Phil, I had to lower captain seat in my F4 it was too high. Drilled holes in lower part of brackets and cut off the legs a bit.
It is a fantastic boat imho. I have MK3, 1983 with 25 years younger amazing Johnson 70 HP EFI. I use my boat in open sea for fishing and pleasure. It easily does 35 knots.
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
pacton01
Posts: 5
Joined: Thu Aug 22, 2019 11:15 am

Re: New Boater Advice

Post by pacton01 »

Thanks Adam, I am still not sure what to do yet as the seat is ideal with the canopy down. Maybe just a small amount off would be ideal. They do seem a lovely boat whether fresh or sea water. I have another question - I need a new cowl seal for the Mariner/Mercury 9.9HP outboard but can't get an original. Does anyone know where to get one to fit? Thanks