tips on laying a permanent mooring in a sheltered tidal bay

Thoughts, Ideas and General Questions
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

tips on laying a permanent mooring in a sheltered tidal bay

Post by dellquay13 »

Hi,
Has anyone got any experience of laying a permanent mooring? It's in an easterly facing bay with a 7m tidal range, and only has a short fetch for easterly winds. The seabed is sand and shingle. I will only be using the mooring in fair weather for overnight stays away from the Marina, so storm security isn't an issue. Until I applied for a mooring licence, I had simply anchored amongst the existing moorings without any issues.
I can't afford to get a professional contractor in to lay a mooring that will only be used half a dozen times a year and then only leaving my boat unattended for a few hours whilst ashore in the pub.
I have done some research online and mushroom anchors seem popular and cheap, with admiralty pattern anchors being a more expensive option. Does anyone have any experience of using either?
Last edited by dellquay13 on Thu Aug 06, 2020 9:52 pm, edited 1 time in total.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
535Mustard
Posts: 177
Joined: Sun Dec 29, 2019 11:07 am

Re: tips on laying a permanent mooring in a sheltered tidal bay

Post by 535Mustard »

When I had a self laid mooring, I had 4 big anchors and dug them in and buried the anchors totally, in a cross shape, chain off of each of them up to a swivel, with another riser chain off up to the bouy.
By big anchors, they were about 4ft long each and had a downward spike on each.

Others filled tyres with concrete and buried them too.

Mind you if you not going to use it much, couldn't you just anchor each time?
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: tips on laying a permanent mooring in a sheltered tidal bay

Post by dellquay13 »

I have applied for a permanent mooring licence because the moorings in the bay are getting busy and finding a unoccupied spot in future may be difficult, and also for the ease of just picking up a buoy rather than setting and lifting an anchor when i just want to stop for a break, if not an overnight stay.
Four anchors might be a bit more security than i need, and there is well over a metre above chart datum at LAT so digging anything in isn't an option. I've got to be able to lay the mooring from the cockpit of my F4, so hauling a big block of concrete over the gunwhale is out of the question too.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
535Mustard
Posts: 177
Joined: Sun Dec 29, 2019 11:07 am

Re: tips on laying a permanent mooring in a sheltered tidal bay

Post by 535Mustard »

As you said before, sounds like just a decent anchor job then.
DACS
Posts: 77
Joined: Sat Jul 19, 2014 9:59 am

Re: tips on laying a permanent mooring in a sheltered tidal bay

Post by DACS »

If you are only going to use the mooring in good conditions, i.e. when you are out in the boat, you do not really need anything more that the equivalents of your normal anchor. Of course, there is always the risk that someone else will "borrow" your mooring with a much larger boat, depending on the sort of cruising area you are in.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: tips on laying a permanent mooring in a sheltered tidal bay

Post by dellquay13 »

Thanks DACS, just need to check how that will match with the milford haven port authority rules, they are a bit touchy about leisure boat moorings, having so many oil and gas supertankers coming in and out of the waterway.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
vreagh
Posts: 327
Joined: Sat Aug 02, 2014 5:46 pm
Location: Cornwall

Re: tips on laying a permanent mooring in a sheltered tidal bay

Post by vreagh »

I've found using the largest scrap commercial diesel head is ideal, lots of holes to pass chain through and, being cast iron, tolerates the salt well
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: tips on laying a permanent mooring in a sheltered tidal bay

Post by Clive »

Just been reading about mushroom anchors. Seems an ok solution if conditions not extreme.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.