536 Roof Hatch

Missing a vital part? Need to track down a spare? Just ask.
Clifft71
Posts: 12
Joined: Mon Oct 12, 2020 12:59 pm

536 Roof Hatch

Post by Clifft71 »

Hi,

I posted a little picture of my 536 sitting in the water at Queensborough, Kent. If you have seen it you will notice the huge hole in the roof. The hatch is missing! would love to find an original to replace it but not from Shetland as they want £195 plus the Vat. For that amount i will happily fabricate something of my own.. any ideas or if you have one would be great.
Clifft71
Posts: 12
Joined: Mon Oct 12, 2020 12:59 pm

Re: 536 Roof Hatch

Post by Clifft71 »

Hi all,

Well I have an update.

I have seen there has been some views on this post but no one left any ideas or suggestions. So I made the bold decision to make a mold and from that a replacement hatch. All this from scratch using a fibre glass resin, which I will add I have never used this before. I watched countless youtube videos :ugeek: before attempting to build a mold. That went ok, I suppose. Wood frame, fill it with resin, add fibre glass leave to go hard and paint. rub down and rub down again. Now that the mold done? nope you then have to add a release wax 5-8 times. Now we are ready to make the part! So apparently you build the part from the outside in. First you put down your gel coat/Top coat, then leave that to dry and repeat. then you start to build the structure in layer of resin soaked fibre glass sheeting, several times to you have the strength you need.

Here come the fun bit...Not! if your mold is good and your release wax is applied well, with a little persuasion the part should release an wallah! your shinny new part is there.

Not for me! I purposely left it for three days to cure, go hard, set, what ever. Then I started to gently persuade it from the mold. I foolishly thought I would be able to re-use the mold to help my fellow 536 owners. Not now, 2 hours of heavy leverage, I broke the mold to pieces and what was I left with?

Well all I can say, I did have fun but it is not quite what I wanted, but it may get me through to spring when I will have another go. :D Maybe.
IMG_0733.JPG
You do not have the required permissions to view the files attached to this post.