Water

Thoughts, Ideas and General Questions
DURLER
Posts: 3
Joined: Sat Apr 17, 2021 2:44 pm

Water

Post by DURLER »

I have just squired a Family 4 , and when removing the table prop in the lounge area found water in the foam . Is this normal if not what do I do to get rid. Thanks in advance
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Water

Post by Clive »

Hi - welcome. There’s a few threads here on this topic, you have a leak somewhere and that needs sorting. From what I’ve read it seems there’s no short cuts and if left eventually the water and foam gets foul and smells.
There will be others here who have dealt with this and are better qualified to say what needs to be done. Does the Family 4 have a bilge?
Is the boat acquired as a project?
Good luck and keep us posted.
Clive
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
DURLER
Posts: 3
Joined: Sat Apr 17, 2021 2:44 pm

Re: Water

Post by DURLER »

Hi Clive, there is a bilge section which is dry. In fact right through cockpit area is dry. I am sucking the water out of the hole via a Henry Machine. It is a project as we have a canal boat with different hull.I might well have to suspend it out of the water to inspect the hull! Durler
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Water

Post by Clive »

You can check all above waterline sources of leaks... The anchor locker is a common weak spot, water gets in and drains down into the hull if there are any cracks. I've got water in the boat form leaky windows, leaky hatch and bow rail fixings. Basically any hole drilled into the deck is a potential leak. Is there any water damage in the cabin? Hope you find it soon.
Cheers, Clive
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Water

Post by Clive »

Oh, and I forgot the rubbing strip, where the two halves of the boat are joined together, that was leaking too!.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Water

Post by dellquay13 »

Rubbing strip and windows were the culprits for leaks on my F4. Luckily the water didn't really get very far into the foam. I replaced the cockpit sole 10 years ago and that made it easy to get what little water was in there out, but it's too drastic for just water removal.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...