Just after some advice, see my attached photo.
I have replaced my cabin floor with plywood and at the moment it is accessible in the two sections in the photo.
I’d like ideally to fit say a wooden floor in one piece but this would mean that below the floor is not accessible.
Is this ok ? Or should I fit a floor that allows access to below ?
As always thanks for your help
You do not have the required permissions to view the files attached to this post.
Hi Dave,
You don't say which model you have, someone may have precise knowledge.
From your picture, I'd guess you have 19' boat, either a 570 or later model based on the same hull. Normally the cabin sole is sealed to keep water out and some bouyancy in, a closed cell foam injected under the sole is the correct way, but other methods have been tried like empty sealed plastic bottles. They will always have gaps between them, and maybe the huge plastic bubble wrap strips found in parcels sealed under the floor might be an option to better exclude water?
Anyway, not many people need access under the cabin sole until it fills with water, and it is usually sealed to keep water out.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
It looked bigger!
No buoyancy built in normally, but it was added to later models for safety. I'm glad that my F4 has it
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
I had to replace all the flooring on my family four as the wood was waterlogged and rotten. I found that the foam was also waterlogged so dug it all out. I filled the void under the new deck with sealed plastic bottles to provide some extra buoyancy (in case of the emergency situation you hope never happens!) and fitted two 8" hatches (one in the cabin) so I can keep an eye on what's going on out of sight. I wouldn't use bubble wrap as I think they are designed to slowly deflate over time.