Hi there everyone
We have just purchased a Shetland 4 plus 2
We are first time boat owners
Can anyone help us.... where is the fuse box??
Thanks
Shetland 4 plus 2
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: Shetland 4 plus 2
Hi. Mine is a 1988 model and the fuse box is in the overhead locker by the diner table (the helm is also in there). I had to replace mine as it was rusty and the connections kept failing. Where are you based? I’ve done most things you can on mine over that last three years!
Cheers, Clive
Cheers, Clive
You do not have the required permissions to view the files attached to this post.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: Shetland 4 plus 2
Tim hall, I have posted pictures but just noticed you are not a full member. It’s a £5 one-off admin fee to let you see and post photos plus have access to the files and the whole group.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
blebrocq
- Posts: 108
- Joined: Thu Oct 20, 2022 11:24 am
Re: Shetland 4 plus 2
Hi. You don't say what age your 4+2 is, but if it helps, I have a brand new one, & the fuses are all the thin blade automotive type, plugged into rubber fuse holders with attached wires. There are three of them: 1 to power the bilge pump direct from one of the batteries, located at the battery.
Two more are inside the locker behind the helm. they feed everything else via two switch panels, one at the helm for external stuff, & one in the locker door for the inside stuff.
Bob
Two more are inside the locker behind the helm. they feed everything else via two switch panels, one at the helm for external stuff, & one in the locker door for the inside stuff.
Bob
-
daveflack
- Posts: 291
- Joined: Fri Nov 08, 2013 6:54 pm
- Location: Black Hawk "Atlast"Ullswater, now a 4+2
Re: Shetland 4 plus 2
Hi all, mine is based around 2 quite substantial bus bars, one "+" one "-",fuses are in-line "auto" blade type, with 2 switch boards, one at the helm & one on the front of that locker in the cabin. If memory serves me well, there is a fuse on each circuit, i.e:- fridge, wipers, lights,water pumps,etc, so as I've added extras I've added fuses as per the spec for the piece of kit, these are also the in-line type as opposed to a fuse board & where applicable I've put sislar bits all of the same switch, ( fish finder, speed log). Just noticed the radio fitted is the same unit I bought, works very well.All the best for the New Year cheers Magic.
-
blebrocq
- Posts: 108
- Joined: Thu Oct 20, 2022 11:24 am
Re: Shetland 4 plus 2
Here are some photos of my electrical connections area behind the helm:
Bob
Bob
You do not have the required permissions to view the files attached to this post.
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: Shetland 4 plus 2
Hi Bob. I can’t help but wonder why they didn’t fit a fuse box instead of the inline fuses, I think it would be better and certainly safer than all those exposed connections. Shouldn’t the pos bus bar have a cover?
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
daveflack
- Posts: 291
- Joined: Fri Nov 08, 2013 6:54 pm
- Location: Black Hawk "Atlast"Ullswater, now a 4+2
Re: Shetland 4 plus 2
Hi all,back again, my lay out is basically the same as the pics, tho my wiring layout is no where near as tidy as that. A neighbour of mine has a 4/5year old boat with this same format, 3 in-line fuse holders. Mine uses nuts onto studs for the bus bars with nylon nut covers on the positive rail nuts only, not had a problem. Cheers magic.
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: Shetland 4 plus 2
Must be ok! I would like to cover the pos bar personally
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
blebrocq
- Posts: 108
- Joined: Thu Oct 20, 2022 11:24 am
Re: Shetland 4 plus 2
Yes, I agree, a cover over the +ve bar would be good, I may try to make one.
Bob
Bob