I need an anchor for my shetland 535. i was thinking of a danforth as there fairly compact hence what size do i need.
I also want to avoid in going on the foredeck to deploy it hence any tips would be most welcome
anchor for a shetland 535
-
vreagh
- Posts: 327
- Joined: Sat Aug 02, 2014 5:46 pm
- Location: Cornwall
Re: anchor for a shetland 535
Choice of anchor depends on where the boat is used and type of bottom, rocky/sand/mud etc. Anchor can be made fast to forward cleat with the line run back to the cockpit with the anchor and chain kept in a container (plastic box etc). A loose sliding loop over the line enables the anchor to be recovered without going forwwrd.
-
Rossco1962
- Posts: 5
- Joined: Wed Oct 26, 2022 3:01 pm
Re: anchor for a shetland 535
many thanks for the prompt reply, its mainly mud or gravel here in the solent area hence would be interested in size but also need to take into account the tide can be strong at early 4 knots but i'm also unlikely to be out in winds stronger than force 3 or 4
Thanks
Thanks
-
Clive
- Posts: 548
- Joined: Sun Jun 23, 2019 8:41 am
Re: anchor for a shetland 535
I’ve just bought a Danforth from someone. Came with chain and rope but not enough for the Solent.
I’ve also just completed a RYA Powerboat Level 2 and VHF radio course on the Solent - I’ve not done coastal and really enjoyed the three days. Highly recommend.
Back to the anchor. A 4kg Danforth is good for 16-25ft boats. On my course the advice was not less than 10m of chain and 30 metres of rope. 6mm chain seems to be the ok. The chain should cope ok with the tidal flows on the Solent. I’ve been tying myself in knots (no pun intended
) for a long time over anchors! Force 4 on Southampton have Danforth type for under £27.95 and is good for mud and sand. https://www.force4.co.uk/item/Force-4/D ... Anchor/GQJ
I’ve also just completed a RYA Powerboat Level 2 and VHF radio course on the Solent - I’ve not done coastal and really enjoyed the three days. Highly recommend.
Back to the anchor. A 4kg Danforth is good for 16-25ft boats. On my course the advice was not less than 10m of chain and 30 metres of rope. 6mm chain seems to be the ok. The chain should cope ok with the tidal flows on the Solent. I’ve been tying myself in knots (no pun intended
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
Rossco1962
- Posts: 5
- Joined: Wed Oct 26, 2022 3:01 pm
Re: anchor for a shetland 535
Many thanks, will look at the Danforth after i've been to see if my boat hasn't been blown away in all the wind we had here last night
Ross
Ross