535 restoration project progress.

Thoughts, Ideas and General Questions
Robsaffer
Posts: 11
Joined: Wed Feb 15, 2023 4:53 pm

535 restoration project progress.

Post by Robsaffer »

Hi all,

Great group for advice and ideas! Bought our first boat a few weeks ago and making a start on tidying it up a bit, so thought I’d share as I go along. If anyone one has and advice or tips on anything you see, it would be great to here from you.
Thanks
Rob
You do not have the required permissions to view the files attached to this post.
blebrocq
Posts: 108
Joined: Thu Oct 20, 2022 11:24 am

Re: 535 restoration project progress.

Post by blebrocq »

Big engine for a small boat !
Bob
vreagh
Posts: 327
Joined: Sat Aug 02, 2014 5:46 pm
Location: Cornwall

Re: 535 restoration project progress.

Post by vreagh »

Looks to be a good boat with a "little" work. Do you have the hatch?
Robsaffer
Posts: 11
Joined: Wed Feb 15, 2023 4:53 pm

Re: 535 restoration project progress.

Post by Robsaffer »

The boat is pretty sound and solid so not much work required 🤞🏻

I don’t have the hatch, do you have one? If so I would be interested but I am thinking maybe stainless one with perplex in to crest some light might be nice?

It come with the big engine, waiting to get it serviced/checked and may swap it out.

Thanks
Robsaffer
Posts: 11
Joined: Wed Feb 15, 2023 4:53 pm

Re: 535 restoration project progress.

Post by Robsaffer »

Coming along nicely
You do not have the required permissions to view the files attached to this post.
vreagh
Posts: 327
Joined: Sat Aug 02, 2014 5:46 pm
Location: Cornwall

Re: 535 restoration project progress.

Post by vreagh »

I lost my hatch in the hurricane of 87 so made one of stainless. Put 10mm perspex in with a 12v 15w solar panel to trickle charge the battery.
You do not have the required permissions to view the files attached to this post.
Robsaffer
Posts: 11
Joined: Wed Feb 15, 2023 4:53 pm

Re: 535 restoration project progress.

Post by Robsaffer »

Great idea!! Do you have any pics of it from the inside at all? Being my first boat and never seen the hatch, wondering how it’s attached and does to open up and what does it rest on when open?

Thanks
Rob
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: 535 restoration project progress.

Post by Clive »

Hi and welcome. Couple of things I've spotted that may be fine but once seen as they say. Where do you plan to use the boat? It looks like the hull and upper joins have had the fixings drilled out and rivets put in one of every third hole (about 30cm apart?). Looks like the fixings are about 10cm. That reduces the strengths lot. If you go coastal and experience swell that joint can cake some pretty extreme forces. Last thing to want is for it to fail.
Is the filling mastic or fibreglass? Is it painted (see the hull is in one pic). I’ve only re glassed (learned the skill via YouTube and East a coast Fibreglass who are amazing). If you are painting not sure how mastic takes paint.
Good luck with it all - boating is amazing even if can quickly become a money pit. Always worth it on the water.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
Robsaffer
Posts: 11
Joined: Wed Feb 15, 2023 4:53 pm

Re: 535 restoration project progress.

Post by Robsaffer »

Thanks Clive,

I was wondering about that joint! Do you suggest I put more rivets in? When I removed the bump strip some of the holes that I have filled were from the bump strip rivits.

Thanks
Rob
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: 535 restoration project progress.

Post by Clive »

Ther are a good number of 535 owners here who are better qualified to answer that. I have a 4+2 which is an altogether different boat. My gut would say yes, add some extra.
So what filler are you using? Looks like you needed plenty!! Mine looked like it had been shot at, it had so many holes!
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.