Hi gang
as the next phase of my 460 fit out nears (replacing the deck) the job would be a whole lot easier if I remove the splashwell.
Has anyone done this or know the implications? Guessing it just rivets in?
Was also thinking I could modify it to give more storage undewr the sides but conerned about the structural implications.
So can I just take it out and do the deck, then rivet it back in (after painting and making it look pretty!).
Thanks
Mark
splashwell!
-
markle
- Posts: 30
- Joined: Sun Apr 22, 2012 9:08 pm
Re: splashwell!
also i may help to say that it looks to be rivited in (but from the other side of the inner skin) if that makes sense, and do feel free to move this to technical if more appropriate.
Thought it worth mentioning as the 535 splashwell seems to be one moulded piece, and i am not cutting any more glass, if I can help it!
Mark
Thought it worth mentioning as the 535 splashwell seems to be one moulded piece, and i am not cutting any more glass, if I can help it!
Mark
-
markle
- Posts: 30
- Joined: Sun Apr 22, 2012 9:08 pm
Re: splashwell!
It came out, eventually!
Just rivets and some sort of gum. I would really like to modify it to create some more deck space.
Wonder as to it's structural worth!
Mark
Just rivets and some sort of gum. I would really like to modify it to create some more deck space.
Wonder as to it's structural worth!
Mark
-
hoblands
- Posts: 26
- Joined: Tue Mar 15, 2011 7:44 am
- Location: Wilson Flyer 17 (Previously several Shetlands)
Re: splashwell!
Hi Mark,
Personally I would be wary of completely removing the splashwell as this is the last line of defence against your stern wave catching you up and swamping the cockpit. Is the boat used for coastal or rivers? The latter probably wouldn't be such an issue as long as you don't have a strong current running on your mooring that could come over the transom during heavy weather. I agree though that it would create a lot of room in the cockpit...
All the best
Paul
Personally I would be wary of completely removing the splashwell as this is the last line of defence against your stern wave catching you up and swamping the cockpit. Is the boat used for coastal or rivers? The latter probably wouldn't be such an issue as long as you don't have a strong current running on your mooring that could come over the transom during heavy weather. I agree though that it would create a lot of room in the cockpit...
All the best
Paul
-
markle
- Posts: 30
- Joined: Sun Apr 22, 2012 9:08 pm
Re: splashwell!
HI Paul thanks for the reply but rest assurred the splash well is 100% going back on! I take my boat up to about 8 miles out from Plymouth so it is definate must, it gets pretty hairy down here!
Reason for the question was more based on the process of removal, and if I could change the shape to make it more like that found on a 535, to give storage for fuel etc under each side.
I have taken it out to allow for easier fitting of a new deck (didnt fancy glassing under it would never have got a good bond).
But still in two minds now it is out, I could make it around 8 inches shorter and still tilt the motor to gain deck space, and possibly invert two two ends with a bit of cutting and glassing to give miles more room.
I am just now sure how much stregth is needed in it to keep the second skin of the hull in place and despite my best efforts any joins I make with glass will not be as good as the original (I am very impressed with the build) it is averaging 5mm pls glass all over and have not cut any holes in the hull but the tapping test suggests that is closer to 10mm (and the fact that the boat weighs loads - no foam in it so no water just over built). Overbuilt is great for me makes me more able to concentrate on the bassing instead of worring about the next epic swell!
Thanks for the reply and any advice on it's structural worth appreciated.
Here is a link to a splashwell I really like - not sure I can be bothered to go this far tho!
http://www.youtube.com/watch?v=GXHkXvrlrhM&feature=plcp
Best wishes
Mark
Reason for the question was more based on the process of removal, and if I could change the shape to make it more like that found on a 535, to give storage for fuel etc under each side.
I have taken it out to allow for easier fitting of a new deck (didnt fancy glassing under it would never have got a good bond).
But still in two minds now it is out, I could make it around 8 inches shorter and still tilt the motor to gain deck space, and possibly invert two two ends with a bit of cutting and glassing to give miles more room.
I am just now sure how much stregth is needed in it to keep the second skin of the hull in place and despite my best efforts any joins I make with glass will not be as good as the original (I am very impressed with the build) it is averaging 5mm pls glass all over and have not cut any holes in the hull but the tapping test suggests that is closer to 10mm (and the fact that the boat weighs loads - no foam in it so no water just over built). Overbuilt is great for me makes me more able to concentrate on the bassing instead of worring about the next epic swell!
Thanks for the reply and any advice on it's structural worth appreciated.
Here is a link to a splashwell I really like - not sure I can be bothered to go this far tho!
http://www.youtube.com/watch?v=GXHkXvrlrhM&feature=plcp
Best wishes
Mark
-
markle
- Posts: 30
- Joined: Sun Apr 22, 2012 9:08 pm
Re: splashwell!
here is progress so far, life is a lot easier with the splashwell out of the way!
Main deck fitted and half of it re foamed, which was not as painful as I thought!
Mark


Main deck fitted and half of it re foamed, which was not as painful as I thought!
Mark


-
markle
- Posts: 30
- Joined: Sun Apr 22, 2012 9:08 pm
Re: splashwell!
Couple more pics of progress, ran out of foam scott bader (fiberglassing supplies - which i recomend) opens tomorrow damn this jubilee (but thanks for two days off).
Now I need to mix up some more putty and fill some parts around the deck i fitted today. Cant wait to get some matt down and get out and on the bass!


Now I need to mix up some more putty and fill some parts around the deck i fitted today. Cant wait to get some matt down and get out and on the bass!

