535 spray screen and cabin windows

Thoughts, Ideas and General Questions
peter
Posts: 15
Joined: Mon Aug 15, 2011 5:00 pm

535 spray screen and cabin windows

Post by peter »

Hi, Does anybody, anywhere have templates or accurate dimensions spray screen and cabin windows for my recently aquired circa 1970's 535. The make shift ones on it are fit for purpose but look horrible so I want to replace.
Thanks,
Pete :o
eddiesmythe
Posts: 25
Joined: Tue Mar 15, 2011 10:04 am
Location: 536 Family four Near Larne Northern Ireland

Re: 535 spray screen and cabin windows

Post by eddiesmythe »

You can buy the windows + spray screen off ebay for £154.45 (for windows) + £117.95 (for spray screen) = £271.95
It would be alot cheaper to make your own. But i thought i would mention it.
peter
Posts: 15
Joined: Mon Aug 15, 2011 5:00 pm

Re: 535 spray screen and cabin windows

Post by peter »

Thanks, making them is what I want to do, hence template/dimensions,
Pete.
peter
Posts: 15
Joined: Mon Aug 15, 2011 5:00 pm

Re: 535 spray screen and cabin windows

Post by peter »

Hi all, the reason I need dimensions is, I'm not sure if the window apertures are the original size.
Pete.
lynch087
Posts: 2
Joined: Wed Aug 24, 2011 12:42 pm
Location: County Louth, Ireland

Re: 535 spray screen and cabin windows

Post by lynch087 »

Hi Pete,
I too am looking for template/dimensions for the windscreen as the old was a bit of a bodged job. Seems like alot of people need them but no one has put them up. I think the admin guy on this site has manuals to upload in the reference area but can't seem to find them so they may not be up yet. I'm hoping there are dimensions in one of them.
peter
Posts: 15
Joined: Mon Aug 15, 2011 5:00 pm

Re: 535 spray screen and cabin windows

Post by peter »

Yeh, looks like I'm gonna have to rely on geometry formulae. Should have listened in school. :?
Pete.
User avatar
Coddy
Posts: 96
Joined: Thu Sep 01, 2011 4:51 pm
Location: Dorset

Re: 535 spray screen and cabin windows

Post by Coddy »

I bought one from here http://www.ebay.co.uk/itm/Shetland-535- ... 720wt_1139 at £79.50 it saves loads of work. Ideally you will need to use manguard, which is very strong and not affected by ultra-violet, for the windows and at 5mm thick can be a pain to cut.
If you use the boat on the sea I would suggest that you cut the windows over size and bolt them into place using s/steel bolts or plastic bolts. I suspect that may well need to replace the window rubber as well in which case the whole window rebuild will start getting expensive. :(

Good luck
Dave
lynch087
Posts: 2
Joined: Wed Aug 24, 2011 12:42 pm
Location: County Louth, Ireland

Re: 535 spray screen and cabin windows

Post by lynch087 »

Cheers Dave, I actually went for the same one too in the end. It will save a good bit of work and I figured I might pay up and get it done right instead of possible mistakes trying to cut at home.
kev
User avatar
alwischy
Posts: 99
Joined: Wed May 11, 2011 7:58 pm
Location: ringwood

Re: 535 spray screen and cabin windows

Post by alwischy »

If you inbox me i have templates of a 535 screen but not the side windows small donation to the site and obviously postage should cover it. :D
peter
Posts: 15
Joined: Mon Aug 15, 2011 5:00 pm

Re: 535 spray screen and cabin windows

Post by peter »

Hi, I sent you mail through the site regarding above. Did you get it ?

Pete
Post Reply