Sheltie 535

Thoughts, Ideas and General Questions
Davie1
Posts: 18
Joined: Sat Apr 18, 2020 3:34 pm

Re: Sheltie 535

Post by Davie1 »

Thanks Adam, yes mostly hard work but stops me going mad during this crisis, have really enjoyed it so far, major expense will be antifoul, paint for inside the boat and marine ply for the floor. Have compression tested the outboard and got 130psi in all cylinders cold.
Adam
Posts: 86
Joined: Tue Oct 02, 2018 3:38 pm

Re: Sheltie 535

Post by Adam »

Good stuff mate. Love your determination!

Because I'm on furlough leave now till end of May, having plenty of time, I've started to restore my Shetland F4 cabin which was in awful contition.
I've removed everything from the inside and now its just only bare fibreglass which I gave good sanding.
I've ordered van interior lining and planning to start continuing my job tomorrow. Love what I do and it keeps me alive in this tough time. Hope I will be able to take my lovely boat out this year...

Maybe I'll start new thread with my project soon :)

All the best, Adam
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
Davie1
Posts: 18
Joined: Sat Apr 18, 2020 3:34 pm

Re: Sheltie 535

Post by Davie1 »

Yep ordered some toplac and pre kote for the cabin and cockpit, also undercoat and antifoul, so hopefully be ready for paint by the time it arrives, looking forward to seeing your progress with the cabin.
User avatar
Freebird19
Posts: 79
Joined: Tue Jan 12, 2016 5:57 pm
Location: Black Hawk "Freebird" Norfolk

Re: Sheltie 535

Post by Freebird19 »

I would love it if you could do a post on relining your cabins. Some before and during photos, step by step guides maybe? Also problems you had to overcome or anything you would do differently. Best of luck!
Adam
Posts: 86
Joined: Tue Oct 02, 2018 3:38 pm

Re: Sheltie 535

Post by Adam »

I will mate. Still working on it and taking photos. Having problem with back pain is not easy but not giving up at all. It starts looking awesome but tonnes of work left though.
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
Davie1
Posts: 18
Joined: Sat Apr 18, 2020 3:34 pm

Re: Sheltie 535

Post by Davie1 »

20200509_132033.jpg
20200509_131942.jpg
20200509_132002.jpg
You do not have the required permissions to view the files attached to this post.
Davie1
Posts: 18
Joined: Sat Apr 18, 2020 3:34 pm

Re: Sheltie 535

Post by Davie1 »

Getting there, going to slow down now as back to work on Thursday, hopefully undercoat the bottom tomorrow
Davie1
Posts: 18
Joined: Sat Apr 18, 2020 3:34 pm

Re: Sheltie 535

Post by Davie1 »

That's the cabin interior painted, the bottom has a coat of primer and have made and fitted a stainless steel plate to tidy up the transom, it goes behind the engine and wraps around to the splash well. That's it now for a couple of weeks till I get home.
Adam
Posts: 86
Joined: Tue Oct 02, 2018 3:38 pm

Re: Sheltie 535

Post by Adam »

I saw in the first picture an extinguisher. It looks like an original one??? Check the dates it could be really fantastic ornament in your boat!!! Year of build my F4 MK3 is 1983 and I still have genuine extinguisher, yay! Obviously I keep it home and have brand new one in the cabin :mrgreen:
Shetland Family Four "Foxy Lady" , 70 hp Johnson EFI four str. You can meet me in the Poole Bay or Lyme Bay area from time to time \m/
Davie1
Posts: 18
Joined: Sat Apr 18, 2020 3:34 pm

Re: Sheltie 535

Post by Davie1 »

20201126_112538.jpg
You do not have the required permissions to view the files attached to this post.