Trolling engine

Thoughts, Ideas and General Questions
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Trolling engine

Post by Clive »

dellquay13 wrote: Mon Aug 30, 2021 1:44 pm
Blimey! I would have gone loopy if I hadn't been afloat in nearly 2 years. You have more patience than me
I’d love to be out more but we seem to have a stupidly busy life! Big garden doesn’t help. Until we got this boat I was a very part time boater. I’ve spent available time this year repairing, restoring and updating so not much use this year but we will be ready to go next year. I really enjoy improving the boat.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Trolling engine

Post by Clive »

I’ve bought some Sea Foam which should clean up the fuel system. Will report back.
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
Clive
Posts: 548
Joined: Sun Jun 23, 2019 8:41 am

Re: Trolling engine

Post by Clive »

So I took off the prop and ran the engine in a dustbin of water using a strong mix of Sea Foam and petrol. 15 mins, leave for 15 mins, repeat until bored! Leave overnight and repeat. I ran engine at 2.5 - 3k revs. Lots of carbon came out but not much smoke. Checked the plugs and they were very mucky but it wiped off easily so seemed to have worked.
Went out on Sunday and put about 3 hours on the engine. Ran a bit rough at first but got better and was perfect at the end. Must have cleared out the muck. Ran at just under 2k revs and less fuel used thank goodness as we had to use the balance in a car for a journey the next day!

As a note, running the engine in a dustbin for that amount of time gets the water hot. I had a hose topping it up and ran another to drain off from the tell tale. Still got warm but not too hot. Fingers crossed it’ll be ok. I need to have it tuned now as I messed up the slow idle jet settings and can’t sort it!
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: Trolling engine

Post by dellquay13 »

Glad to hear you've got it sorted, and been back afloat. Also that your heads refurb went well and self pump out works smoothly. Being able to sort your own black water disposal without fuss must be a big plus for an inland trailer sailor.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...