610

Thoughts, Ideas and General Questions
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: 610

Post by daveinglasgow »

Then you need one that lookl like a bent shovel and not the one with prongs. 10K should do it with chain + warp

Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
ANTHONY
Posts: 10
Joined: Mon Feb 25, 2013 1:20 pm

Re: 610

Post by ANTHONY »

hi thank Sue .it is mood also need to know what weight is best for the 610 and witch type of anchor
many thanks

Does anyone have used a bar stool for driver seat???
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: 610

Post by admin »

see Daves comments above this post. we have a 570 so not much smaller than your 610

We have a folding plow anchor 9KG plus warp and chain. we use this in the Hamble. we also carry a folding grapel anchor for other beds we find in the solent

Sue
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
ANTHONY
Posts: 10
Joined: Mon Feb 25, 2013 1:20 pm

Re: 610

Post by ANTHONY »

hi the hamble is mood so what type of anchor is needed and what weight should it be for a 610
many thanks
User avatar
admin
Site Admin
Posts: 862
Joined: Sat Feb 19, 2011 3:00 pm
Location: "Phonix" , Tuckton Basin, Christchurch

Re: 610

Post by admin »

Please read the 2 replies to your question above, but to reiterate you will need a min 10kg plough anchor with warp and chain
There is NOTHING--absolutely nothing--half so much worth doing as simply messing about in boats.
Kenneth Grahame
ANTHONY
Posts: 10
Joined: Mon Feb 25, 2013 1:20 pm

Re: 610

Post by ANTHONY »

thanks all. did not see put twice same question sorry
ANTHONY
Posts: 10
Joined: Mon Feb 25, 2013 1:20 pm

Re: 610

Post by ANTHONY »

HI, does anyone know where i can find photo or diaghram of 12volt electric board
as the boat hasnt got any wiring at all.......
many thanks
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: 610

Post by daveinglasgow »

Hi

The come with them when you buy them. oh and always buy more switches than you think you need and an internal and external cig lighter is v handy on the 610 so I have a 6 outside and 6 inside

bilge,
side nav lights,
centre nav light
fishfinder/ depth gauge
VHF
plotter

cabin

radio
sink water pump/ cooker
lights
cig socket
battery tester gauge

then its the fun bit of connecting the wires!

Dave
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices