4 + 2 NYLON WINDOW FIXING NUTS & BOLTS

Thoughts, Ideas and General Questions
aggalletley
Posts: 63
Joined: Fri Feb 24, 2012 4:44 pm

4 + 2 NYLON WINDOW FIXING NUTS & BOLTS

Post by aggalletley »

Hi my 4 + 2 front and side windows are fixed with nylon style black countersunk bolts with white domed nuts on the inside of the cabin. Over time some of these have perished and break off on the inside so the white domed nuts fall off. Others are as good as new. Does anyone know where I can buy replacements from. I presume I just drill out the old bolts and replace with new and some silicone around the shafts so I remain waterproof.
Deaks
Posts: 71
Joined: Sun Dec 02, 2012 6:31 pm
Location: 'Fortune', Black Hawk, Harrogate

Re: 4 + 2 NYLON WINDOW FIXING NUTS & BOLTS

Post by Deaks »

leakywindows

Re: 4 + 2 NYLON WINDOW FIXING NUTS & BOLTS

Post by leakywindows »

Here's the one we use: http://www.mossexpress.co.uk/mss/mss-pc ... 00460001VR

I would be inclined to renew the sealant between perspex and GRP while you are at it, unless it has just been done recently. Arbomast BR Black used to be the best until they stopped making it last year, but Sikalastomer-710 is not too bad. Butyl Rubber is good to use as it is non-setting and easy to remove again when you want to. Sikaflex-291 will seal almost anything, but is messy to work with and difficult to remove later. Putting black nylon washers between perspex and GRP helps getting the right spacing.
leakywindows

Re: 4 + 2 NYLON WINDOW FIXING NUTS & BOLTS

Post by leakywindows »

And here's where we got the dome nuts from:

http://www.ebay.co.uk/itm/M6-Nylon-DOME ... OC:GB:3160
aggalletley
Posts: 63
Joined: Fri Feb 24, 2012 4:44 pm

Re: 4 + 2 NYLON WINDOW FIXING NUTS & BOLTS

Post by aggalletley »

Many thanks....what a brilliant response. Already have the Moss Express catalogue in front of me the fixings are exactly what I want