4 + 2 NYLON WINDOW FIXING NUTS & BOLTS
-
aggalletley
- Posts: 63
- Joined: Fri Feb 24, 2012 4:44 pm
4 + 2 NYLON WINDOW FIXING NUTS & BOLTS
Hi my 4 + 2 front and side windows are fixed with nylon style black countersunk bolts with white domed nuts on the inside of the cabin. Over time some of these have perished and break off on the inside so the white domed nuts fall off. Others are as good as new. Does anyone know where I can buy replacements from. I presume I just drill out the old bolts and replace with new and some silicone around the shafts so I remain waterproof.
-
Deaks
- Posts: 71
- Joined: Sun Dec 02, 2012 6:31 pm
- Location: 'Fortune', Black Hawk, Harrogate
-
leakywindows
Re: 4 + 2 NYLON WINDOW FIXING NUTS & BOLTS
Here's the one we use: http://www.mossexpress.co.uk/mss/mss-pc ... 00460001VR
I would be inclined to renew the sealant between perspex and GRP while you are at it, unless it has just been done recently. Arbomast BR Black used to be the best until they stopped making it last year, but Sikalastomer-710 is not too bad. Butyl Rubber is good to use as it is non-setting and easy to remove again when you want to. Sikaflex-291 will seal almost anything, but is messy to work with and difficult to remove later. Putting black nylon washers between perspex and GRP helps getting the right spacing.
I would be inclined to renew the sealant between perspex and GRP while you are at it, unless it has just been done recently. Arbomast BR Black used to be the best until they stopped making it last year, but Sikalastomer-710 is not too bad. Butyl Rubber is good to use as it is non-setting and easy to remove again when you want to. Sikaflex-291 will seal almost anything, but is messy to work with and difficult to remove later. Putting black nylon washers between perspex and GRP helps getting the right spacing.
-
leakywindows
-
aggalletley
- Posts: 63
- Joined: Fri Feb 24, 2012 4:44 pm
Re: 4 + 2 NYLON WINDOW FIXING NUTS & BOLTS
Many thanks....what a brilliant response. Already have the Moss Express catalogue in front of me the fixings are exactly what I want