New Engine, Bad Vibrations!

Thoughts, Ideas and General Questions
alliejy
Posts: 8
Joined: Sat Apr 30, 2011 4:23 pm

New Engine, Bad Vibrations!

Post by alliejy »

Hi all, we are fairly new (second year) owners of a 535. We had a brand new Mercury 15hp 4 stroke engine fitted to the boat earlier this year. Unfortunately, it has made the boat vibrate very badly. The engineer who fitted it has tried and so far failed to get to the bottom of the problem.
Has anyone else had an issue with this, and if so, did they find a solution? Many thanks
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond
Contact:

Re: New Engine, Bad Vibrations!

Post by daveinglasgow »

Hi

well the good news is ..... all engines shake just like when you open up the bonnet of a car. So like cars you need to look at why it is vibrating to much and the rubbers in the case is not dampening this down. It could also be due to a warn part holiding the engine to the transum bracket or the transum bracket or badley fitted.

Either way if the engines is running well which the dealer should know , you should look for play in the engine to the case, to the mounting, to the transum. good luck

Dave
alliejy
Posts: 8
Joined: Sat Apr 30, 2011 4:23 pm

Re: New Engine, Bad Vibrations!

Post by alliejy »

Thanks, we will look at your suggestions. The thing which is baffling us is that vibration was not an issue with the old engine, which was a 30+ year old bone shaker.
There must be a solution, still hoping to find it!
lesliejones58
Posts: 100
Joined: Fri Apr 08, 2011 2:44 pm

Re: New Engine, Bad Vibrations!

Post by lesliejones58 »

Had same problem with pilot boat turned out to be the prop
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: New Engine, Bad Vibrations!

Post by dellquay13 »

Hi,

Bad vibration from an outboard is usually down to either a damaged prop, a bent drive shaft in the gear box or even a cylinder not firing. Not what you would expect from a brand new engine, and a good engineer should be able to spot any of those problems pretty quickly.

Chris
alliejy
Posts: 8
Joined: Sat Apr 30, 2011 4:23 pm

Re: New Engine, Bad Vibrations!

Post by alliejy »

Thank you all for your suggestions and help, much appreciated.

Not getting too much joy from the boatyard. Don't think he's even looked at it!

Anyone know any good engineers in the Beccles/Oulton Broad/ Lowestoft area?
dellquay13
Posts: 556
Joined: Tue Mar 15, 2011 7:45 am
Location: Pequod, F4 mk4, Milford Haven Marina

Re: New Engine, Bad Vibrations!

Post by dellquay13 »

Hi,

I'd stick with pushing the guy who has already taken your money, if you get someone else to do anything to the engine, you could end up losing your statutary rights from the seller.

Chris
trickytrev
Posts: 43
Joined: Sun May 22, 2011 12:39 pm
Location: Quicksilver Pilothouse with 60 Mariner 4stroke. On a Trailer.

Re: New Engine, Bad Vibrations!

Post by trickytrev »

Hi There, Have you asked at the boatyard if you could try the engine on another boat.Then you be able to tell if the problem is with the engine or your boat.
alliejy
Posts: 8
Joined: Sat Apr 30, 2011 4:23 pm

Re: New Engine, Bad Vibrations!

Post by alliejy »

Bloke says he tried a different engine on our boat and it had the same problem.

Anyone got any ideas what it could be on our boat that is causing this?

Thanks
trickytrev
Posts: 43
Joined: Sun May 22, 2011 12:39 pm
Location: Quicksilver Pilothouse with 60 Mariner 4stroke. On a Trailer.

Re: New Engine, Bad Vibrations!

Post by trickytrev »

Hi There, whatever the problem is it wants fixing. Find a reputable Merc dealer and ask if you can book the boat and engine in an get a full report on what the cause is. It should not cost you that much. Say a couple of hrs labour and then you will know for sure what the problem is.
Post Reply