Replacing a deck on shetland 535

Thoughts, Ideas and General Questions
Barton
Posts: 17
Joined: Wed Nov 18, 2015 3:15 pm
Location: NORTH DEVON

Re: Replacing a deck on shetland 535

Post by Barton »

hi all now have your photos thank you Whammers i can see your stringers and ribs i not got in mine wonder now is she a SHETLAND ,i try to post photos
You must be a paid member to view and download attachments.
Barton
Posts: 17
Joined: Wed Nov 18, 2015 3:15 pm
Location: NORTH DEVON

Re: Replacing a deck on shetland 535

Post by Barton »

think i attached photos here now to wards the transom
You must be a paid member to view and download attachments.
Whammers
Posts: 134
Joined: Wed Sep 24, 2014 3:30 pm

Re: Replacing a deck on shetland 535

Post by Whammers »

Hmmm, definitely doesn't look like a 535. Perhaps somone with geater knowledge will be able to identify it.

Andy
vreagh
Posts: 324
Joined: Sat Aug 02, 2014 6:46 pm
Location: Cornwall

Re: Replacing a deck on shetland 535

Post by vreagh »

Hi, Well she looks like no Shetland I can remember but still a good looking boat. Highish freeboard and deep V forward should make a good sea kindly boat. I`ll look through some old (60s) magazines to see if she can be identified. Regards. Keith
Barton
Posts: 17
Joined: Wed Nov 18, 2015 3:15 pm
Location: NORTH DEVON

Re: Replacing a deck on shetland 535

Post by Barton »

thank you guys again , well i can work out how high and how long to make ribs and stringers But how many ribs dose she need ,she is 17 ft long not sure :cry: of her width as i home , have tried looking on line but no luck so far sill looking
Last edited by Barton on Mon Nov 23, 2015 2:05 pm, edited 1 time in total.
Barton
Posts: 17
Joined: Wed Nov 18, 2015 3:15 pm
Location: NORTH DEVON

Re: Replacing a deck on shetland 535

Post by Barton »

picture with cover off this rail has been made out of copper water pipe and joints YES COMING OFF SOON , SOMETHING WITH MORE STRENGTH ,Well if not a Shetland i wonder what , all so will admin (SUE ) let me stay no site as need a lot of advice for you guys Barry
You must be a paid member to view and download attachments.
Barton
Posts: 17
Joined: Wed Nov 18, 2015 3:15 pm
Location: NORTH DEVON

Re: Replacing a deck on shetland 535

Post by Barton »

hi was told when i bought her she was a shetland so not know now ,been looking on line can not find anything like her ,anyone know were the best place to look up old boats makes and design please
Barton
Posts: 17
Joined: Wed Nov 18, 2015 3:15 pm
Location: NORTH DEVON

Re: Replacing a deck on shetland 535

Post by Barton »

well have now all most got cap off hull beaten by weather need to sort out transom then the floor stringers and ribs if i need them or know were to put them ??????
vreagh
Posts: 324
Joined: Sat Aug 02, 2014 6:46 pm
Location: Cornwall

Re: Replacing a deck on shetland 535

Post by vreagh »

Hi, years ago when I was more involved with boat building, a lot of stringers and ribs etc were made out of closed cell polyurethane foam, easy to cut and former and glass fibre sticks to it. It's the shape of the glassfibre that gives the strength while allowing flexibility. The foam is brown and may be the same as sold for house insulation, you could try a piece in water to make sure it doesn't absorb water. The polystyrene type of foam is useless as it is dissolved by polyester resin. Hope this helps. Keith
Barton
Posts: 17
Joined: Wed Nov 18, 2015 3:15 pm
Location: NORTH DEVON

Re: Replacing a deck on shetland 535

Post by Barton »

yes Keith that make sense to me , i will try a piece in water , Yes apart from the weather i can get on now , love that many blessings REAL big thank you Barry , some one all said boat looks like a Shetland then he was not to sure on second look so i not know what she be ,, any way thank you again Keith ,,, Barry
Post Reply