Help Please

Thoughts, Ideas and General Questions
stuart50
Posts: 48
Joined: Wed Jun 18, 2014 8:20 pm

Help Please

Post by stuart50 »

Can anyone shed any light on the year of my Shetland 535
User avatar
IlsonMark
Posts: 42
Joined: Thu Oct 02, 2014 12:27 pm
Location: Ilkeston, Derbyshire

Re: Help Please

Post by IlsonMark »

There is a list of serial numbers and years is in this thread here. - viewtopic.php?f=14&t=282

Looks like yours is late 60s according to this.
stuart50
Posts: 48
Joined: Wed Jun 18, 2014 8:20 pm

Re: Help Please

Post by stuart50 »

Many thanks for your quick response, the reasons why I was asking is that I am looking for a secondhand 4 stroke engine up to 20 HP and was asked by by a seller if I wanted long or short shaft.
The guy said if it was an early model it would only be a short shafted engine . Looks as though its a short shaft then

Kind regards

Stuart
DACS
Posts: 77
Joined: Sat Jul 19, 2014 9:59 am

Re: Help Please

Post by DACS »

You would probably be better of measuring the transom rather than estimating whether your boat is an early or late one.

As a general guide outboards can have short, long or extra long shafts which are 15", 20" and 25" long respectively. This measurement is from the underside of the outboard bracket to anti-cavitation plate. Since you want the anti-cavitation plate level with the bottom of the boat you can usually just measure the transom and pick a matching outboard.
stuart50
Posts: 48
Joined: Wed Jun 18, 2014 8:20 pm

Re: Help Please

Post by stuart50 »

Sounds like a plan many thanks for your reply

Kind regards

Stuart
User avatar
IlsonMark
Posts: 42
Joined: Thu Oct 02, 2014 12:27 pm
Location: Ilkeston, Derbyshire

Re: Help Please

Post by IlsonMark »

I think it is quite easy to tell with a Shetland 535. For example, here's mine below. This one has a long shaft engine.

viewtopic.php?f=9&t=1818

Now look at the two here. The transom on these is much lower, therefore these are the short shaft model. (At least I assume they are, I've never actually owned a short shaft one!)

viewtopic.php?f=9&t=1173

viewtopic.php?f=9&t=158

Measuring, as mentioned before is also a good idea. But if you look at various pictures of 535s, they all either come with one of these two transoms.
stuart50
Posts: 48
Joined: Wed Jun 18, 2014 8:20 pm

Re: Help Please

Post by stuart50 »

Many thanks it would appeared mines a long shaft so I will have to measure to confirm once again thanks for the pictures

Kind regards

Stuart
daveinglasgow
Posts: 680
Joined: Tue Mar 15, 2011 9:04 am
Location: Dave Ashton, Shetland 610 Glasgow & Loch lomond

Re: Help Please

Post by daveinglasgow »

with luck it will be a long shaft as they are far easier to get hold of! :D
http://www.ashtonmarineservices.co.uk, Brokergae, Trailers, advice, boat transportation 0759 563 8185
https://www.facebook.com/ashtonmarineservices
stuart50
Posts: 48
Joined: Wed Jun 18, 2014 8:20 pm

Re: Help Please

Post by stuart50 »

Nope def a short shaft :-)