Hi All,
My 2010 F4 has been out the water for several months. Checking the under floor rear drainage plug I got a couple of pints of water out. The windows have been resealed last year so they are fine. I don't think the anchor locker is at fault but I will fit a cover soon.
This leaves the join between the hull and topside covered by the rubbing strip.
I really don't want to renew the rubbing strip yet.
Any thoughts on sealing the top edge of the rubbing strip with a colour match marine sealant as a shortish term measure.
Thanks
Mark
Sealing the rubbing strip. F4
Re: Sealing the rubbing strip. F4
Hi - I did my 4+2 a while back and posted what needs doing. Straightforward job but needs to be done carefully. The leak is between the hull and superstructure so the rubbing strip has to come off. I don’t think sealing the rubbing strip will help unless it’s made different to mine. I did one side at a time so it stayed in the right position. Here’s the link
viewtopic.php?p=13014&hilit=Clive#p13014
viewtopic.php?p=13014&hilit=Clive#p13014
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
Psychicsurveyor
- Posts: 6
- Joined: Sun Sep 05, 2021 3:11 pm
Re: Sealing the rubbing strip. F4
Thanks Clive, I will leave it until it is out of the water next.
Re: Sealing the rubbing strip. F4
Yes, not something you’d want to tackle on the water. Mine was a bit of a sieve when I got it. Is the water clean or rusty? Just when I thought it was all done I found the bow rail fixing was leaking. Tiniest movement was enough to let water drip in and stain my lovely new lining
. Might be worth checking cleats or anything drilled into the gunnel. Joys of older boats I’m afraid!
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: Sealing the rubbing strip. F4
There's another pertinent thread on sealing deck to hull joints. I don't know how to add a link, but if you search 'Blackhawk deck to hull fixings' you should find it.
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
Re: Sealing the rubbing strip. F4
That link makes me look more clever than I am! I went to the page and copied the url. The forum cuts the url back when you post. Simples!
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.
-
dellquay13
- Posts: 556
- Joined: Tue Mar 15, 2011 7:45 am
- Location: Pequod, F4 mk4, Milford Haven Marina
Re: Sealing the rubbing strip. F4
I have now sold my 1989 F4 mk4, 2015 70hp 4str Yamaha. Milford Haven. I proudly owned it for over 20 years, before changing to sailpower and a yacht...
Re: Sealing the rubbing strip. F4
Interesting - with that link I got all the keywords highlighted. If I cut and paste the url I don’t. I’ll try here
viewtopic.php?p=14111#p14111
viewtopic.php?p=14111#p14111
4+2 (1988) 35hp Honda outboard, currently in a field outside Horsham.